PLPPC Series: 3 in 1 Polypropylene & Activated Carbon cartridges

(Data sheet download 105k)

PLPPC-SERIES cartridges has been designed primarily for use in removing organics and particulate contaminates from plating, acid, alkaline, and hydrocarbon carbon solutions. The pre-filtering outer shell is a strong polypropylene filter(5~8mm) or polyethylene with polypropylene end caps. There are 200gą10g of activated granular coconut carbon per 10" length, providing an extended life of up to 60% over the cartridges. The liquid flows from the outside of the cartridges through the carbon granules, removing organics, and finally through the inner polypropylene core which is surrounded by melt-blow layer fine micro fibers which again filter the solution and assure no carbon bleed-off.

 

PLPPC Series Recommended Applications

項目符號 Drinking water
R.O. Water purification
Benzene/Toluene
Amines, glycols, sulfanols
PCB's (polychlorinated biphenyl)
Vending machines
Organic contaminants
Photographic
Clarity improvement
De-chlorinating
Cooling tower treatment
Plating solutions
Beverages
Oil removal
Aquarium water
Aromatic compounds
V.O.C.
High molecule weight alcohols
Waste water treatment
Color removal

PLPPC Series Features

項目符號

Three separate stage of filtration in one filter cartridge
項目符號

"Dual-purpose" filters:
項目符號

sediment removal;

項目符號

Removal of free chlorine, foul taste, odor, colors.
項目符號

Low pressure Drop. High performance.
項目符號

Long service life
項目符號

Various Media are available.
項目符號

No carbon ash release.

PLPPC Series constructions and materials

PLPPC-Series Outer layer PP (Polypropylene filter)5~8mm
Inner layer PP (Polypropylene filter)5~8mm
PP (Polypropylene core) 3~5mm
Polypropylene core which is surrounded by melt-blow micro fibers layer
PLEPC-Series Outer layer PE (Polyethylene filter)3~5mm
Inner layer PP (Polypropylene core)
Polypropylene core which is surrounded by melt-blow micro fibers layer
End caps Polypropylene
Gaskets Buna-N
Outer net Polypropylene
Operation conditions Maximum operating pressure ≤120PSI
Maximum operating Temperature 60oC~85oC

~Special order filters are available in varying OD with length for 5" to 40".
~Various of media, End cap colors are available
~OEM are welcome.

PLPPC Series type of carbons specification

Model Type of Activated Carbon Bet. N2 Surface Area(m2/g)
 		 Iodine Number (mg/g) Methylene
Blue Adsorption (mg/g) 		Benzol Adsorption/CTC(%) Hardness (%) Bulk Density
(g/cm3) 		Ash Content (%) Moisture (%) pH Size (mm) Applications
      (ASTM) GB/-7702.6
1997 		  (ASTM) (ASTM) (ASTM) (ASTM)   (ASTM)  
C Coal shell base A.C. 1000 ≥950 ≥160 ≥33/60 ≥90 ~0.43 ≤15 < 5 ~9   commercial &Industry
CA Acid wash coal shell base A.C. 1000 ≥950 150 ≥33/60 ≥90 ~0.43 ≤10 <5 ≥6   commercial &Industry
CW Water wash coal shell base A.C. 1000 ≥980 ≥170 ≥33/60 ≥90 ~0.43 ≤15 ≤5 ~9   commercial &Industry
N Nut shell base A.C. 1000 ≥1000 ≥135 ≥33/55 ≥90 ~0.42 ≤10 <5 ~9   commercial &Industry
NA Acid wash nut shell base A.C. 1000 ≥1000 ≥120 ≥33/55 ≥90 ~0.42 ≤6 ≤5 ~6   commercial &Industry
NW Water wash nut shell base A.C. 1000 ≥1000 ≥135 ≥33/55 ≥90 ~0.42 ≤10 ≤5 ~9   commercial &Industry
CC Coconut shell base A.C. 1000 ≥1000 ≥135 ≥33/55 ≥95 0.43 ≤8 ≤5 ~9   commercial &Industry
CCA Acid wash coconut shell base A.C. 1000 ≥1050 ≥135 ≥33/55 ≥95 0.43 <5 <5 ~6   commercial &Industry
CCW Water wash coconut shell base A.C. 1000 ≥1100 ≥135 ≥33/55 ≥95 0.43 <8 <5 ~9   commercial &Industry
□+WW Fe≤100PPM Cl≤100PPM ≥1000 ≥1200 ≥170 ≥60 ≥90 0.43 <8 <6-7 ≥6   Industry

 


 

Flow Rate (L)

Chlorine:2PPM 4L/min(No:PLPPCC-10-D1)
3136GAL

 
Flow Rate (L)

Chlorine:2PPM 4L/min(No:PLPPCC-10-D1)
3136 GAL

Ordering Information

Perfect Life International Limited

H3, 3/F, High Win Bldg., 47 Hoi Yuen Rd., Kwun Tong, Kln., HK

Tel:+852-21210231 Fax:+852-21210230  Email: sales@perfectlife.com.hk
Home
Products